Sometimes a graphic design looks great on the screen, but after printing and assembling, the cover cracks at the fold like an old folder from the archives. The culprit is often the lack of appropriate finishing processes. We show when these techniques are mandatory and when they can be skipped without risk.
What is the difference between scoring and folding and how is it done in practice?
Scoring is pressing the paper with a special bar or scoring wheel, which indents the material along a line of crease without cutting it. This allows the cellulose fibers to separate controllably instead of cracking at random points. Folding, on the other hand, is the actual bending, i.e., physically folding the sheet along a designated line, usually on a folder. One could say that scoring prepares the paper for bending and folding performs it.
In practice, these two processes often go hand in hand, but they are not always equal. Thin paper, such as 80g or 90g offset paper used for letterhead, can be folded immediately on a folder. The fibers are flexible enough that the fold turns out even and without cracks. The situation is different with thicker materials, coated papers, or cardboard with UV varnish. Here, proper finishing is a preliminary step without which the fold may fail.
Technically, appropriate finishing techniques are performed on machines using special forms or on separate finishing devices. In digital printing, these processes are most often carried out on folders with additional modules or on cutting plotters. Finishing is priced per unit, and the minimum charge covers the entire print run, regardless of the number of sheets.
- Scoring, indenting a crease line in paper, prevents cracking with thicker materials.
- Folding, physically folding the sheet along a line, is used independently of scoring with thin papers.
- Order, with thick paper, scoring is done first, then folding.
When does the lack of finishing result in cracked paper and damaged covers?
The problem of cracking paper during folding typically occurs with sheets above a certain grammage, when the cellulose fibers at the crease point experience a sudden rupture, and the layer of ink or toner cracks along with them. This is not a subtle defect visible only under magnification. A crack on the spine of a marketing folder or a catalog cover is immediately noticeable, and a client receiving such a print run has every right to contest it.
With thicker paper, especially with UV varnish or laminate, finishing is mandatory, as without it the fold may crack. A typical case in which proper finishing before folding is necessary and not just optional.
The good news is that well-executed finishing allows for the folding of even thick materials without visible cracks. This means that even durable, stiff covers of marketing folders or hard cardboard packaging can be folded aesthetically, provided that someone thought of this stage earlier in the production process and not just after printing the entire run.
It is also worth noting that cracking can occur even when appropriate techniques are used if something went wrong in the process. The most common causes include improper fiber direction of the paper. Therefore, with designs featuring selective UV varnish, it is advisable to plan an appropriate time gap between production stages rather than hastening the entire process.
If you are designing a marketing folder or catalog cover, immediately mark the place for finishing in the files. This will save you from corrections at the proofing stage.
What are the types of folds and what are they used for?
Folding is used with lower grammage papers, usually up to about 170 g, such as typical 130 g coated flyers, whereas finishing applies to thicker materials like cardboard packaging, boxes, folders, and invitations. The choice of the type of fold, however, depends not only on the grammage but primarily on the function the finished product is intended to serve.
The simplest is a single fold, which is folding in half. It works well for invitations, greeting cards, and simple flyers. If you’re planning to print invitations or cards, formats like A5 folded to A6 or DL folded horizontally or vertically are based on this simple fold, and the selection of ready-made invitation and card formats makes planning the entire print run easier without unnecessary paper waste.
The accordion fold, also known as the zigzag fold, involves alternating folds in several parallel lines, so that the material unfolds like an accordion. This solution is often chosen for instructions, maps, and multi-page flyers, where a lot of content needs to fit into a small closed format while still allowing the reader to easily unfold the whole thing.
The folder fold, also referred to as a gate fold, is the folding of two wings inward, without a shared line in the center of the sheet. It works well for catalogs presenting products from both sides, which reveal central graphics when opened. With company catalogs and multi-page brochures, it’s worth thinking about the right type of fold from the start, as brochures and catalogs with prints differ in thickness and binding method depending on the number of pages and paper grammage.
The cross fold combines two folds at right angles to each other, resulting in a small, handy format from a large print surface. This solution is typical for maps and large informational posters, less commonly used in standard commercial printing, but worth knowing when designing materials with an unusual content layout.
With finishing services on supplied materials, profitability for folding usually starts from a certain print run, which should be taken into account at the budgeting stage, especially for one-time events like invitations for a specific occasion.
How to choose the right technique for paper grammage at the design stage?
Choosing the right techniques effectively prevents the cracking of the print coating on thicker paper, and the lack of appropriate finishing results in unsightly cracks in the applied ink on products such as brochure covers. It is at the design stage, and not only upon receiving the finished print run, that it is determined whether the product will withstand the test of time.
When selecting grammage for letterhead paper or cover materials, it’s worth following a simple rule: the thicker and more coated the paper, the greater the risk of cracking without the right technique. Standard offset papers of 80g or 90g, popular in printed letterhead paper, generally do not require special processes when simply folded in half. The problem only starts with thicker papers that have a stiffer structure.
The choice of materials should be consulted already at the stage of preparing files for printing, as some withstand folding in one direction better than in the other. Folding should be performed along the paper fibers, as this reduces the risk of their cracking and damage to the ink at crease points. The fiber direction is not always obvious from the finished PDF file, so it’s a good idea to ask the printing house how the sheet is set up on the machine before the production of the entire run begins.
It’s also worth remembering the profitability thresholds of different printing technologies. In offset printing, the profitability threshold usually starts at a certain number of sheets, while digital printing is worthwhile from one piece. For small print runs, such as personalized invitations or a small batch of folders for a conference, digital printing combined with appropriate finishing can be more cost-effective than waiting for the offset threshold.
Choosing paper and its parameters is also a good moment to check the detailed list of materials and papers available for printing, before finalizing the format and grammage of the project. This helps to avoid situations where the graphic design is already ready, only to find out during the pricing stage that the chosen materials require additional finishing, which must be added to the cost estimate.
What mistakes in ordering finishing are the most costly?
The most common mistake is completely omitting information about the necessary techniques in the files submitted for printing. The designer prepares the graphics assuming that the fold will somehow arrange itself, and the printing house learns about the need for special techniques only at the realization stage, which prolongs the entire process and sometimes necessitates adjustments to the graphic layout concerning the fold.
The second problem is confusing finishing techniques with perforation. Perforation makes a line of dots on the paper, making it easier to tear off, but it weakens the material structure at the crease and is unsuitable for covers or folders that need to remain integral.
The third error concerns the direction of paper fibers relative to the planned crease line. If the project assumes folding across the fibers and the material is cut in the wrong direction, even properly executed finishing will not prevent minor cracks at the crease edge. This is a topic that often escapes those ordering printing for the first time, as the direction of the fibers is rarely specifically stated in the paper specification, one needs to ask about it.
The fourth, equally common problem is transitioning too quickly from UV coating to further stages. The coating requires time to fully harden before being subjected to pressure. When speeding up production, especially in express orders, this stage tends to be shortened, resulting in cracking of the coating despite correctly executed finishing techniques.
Imagine this scenario: a company orders folders for a conference with embossed and UV coated logos on the cover, and the production deadline is tight. If someone skips the time gap for hardening the coating, the entire run may be delivered with visible scratches on the crease of the spine. Therefore, when choosing printed marketing folders, it’s important to establish a production schedule in advance to ensure that each finishing stage has its time.
A separate category of errors concerns projects with cardboard elements for CD packaging and digipacks. Clients often focus solely on the medium itself, forgetting that cardboard packaging requires as precise techniques as folders or catalogs. A cracked spine of a digipack looks unprofessional even with a perfectly embossed disc, and the choice of the right cardboard and prior planning makes the difference between a solid publication and a product that falls apart after a few openings. It’s worth looking at how to choose between a digipack and a jewel case before finalizing the packaging form, and check the summary of CD-Box boxes with covers available for production.
Similar logic applies to every cardboard packaging, not just musical. For projects of product boxes or premium packaging, it’s worth analyzing in advance how good finishing impacts the brand's perception, as the topic of how unboxing experience influences store success shows that finishing details like a clean, uncracked fold can weigh much more on the customer’s first impression than the graphics on the packaging itself.
The last thing to remember: if you plan to print invitations for a family or business event, a good card fold is not only a matter of aesthetics but also of the guest’s convenience when opening the envelope. While planning such materials, one can also look for inspiration in the form of ready-made invitation templates for various occasions to match the graphic idea with the real folding possibilities of the chosen format.
Frequently Asked Questions
Does every paper need to be properly prepared before folding?
No. Papers with lower grammage can usually be folded on a folder without special finishing, especially if they do not have UV coating or laminate. Thicker and coated materials require additional steps to avoid cracking.
What is the difference between appropriate finishing and perforation?
Finishing strengthens the crease location, while perforation cuts the paper with a line of dots, weakening its structure to make it easier to tear off a piece. These are two completely different processes with opposing goals.
Why does my paper crack despite using appropriate techniques?
The most common culprit is an improper paper fiber direction relative to the crease line or too short drying time of coatings. It’s worth reporting this issue to the printing house before realizing the full run.
Does folding always require prior finishing?
Not always. Thin papers, typical for flyers or standard letterhead paper, can be folded without special techniques. Additional techniques become necessary with thicker, coated, or varnished materials.
What type of fold should I choose for a company catalog?
It depends on the number of pages and the way content is presented. The folder fold works well for two-sided presentations with central graphics, while for a larger number of pages, saddle stitching is preferable.



